Counter knife 279x90x30 Premium Line

Counter knife GMZM0279-WF1 from CUTMETALL for crushing machines from Zerma (Amis)

Compatibility with machines:

Cutting performance and durability:

The performance of the product depends predominantly on the variant of the material and cutting geometry.

The W-version is fabricated from alloy tool steel. In contrast to the X-option, it has a shorter service life due to the 5 % lower hardness. However it is also less fragile in parallel. Knives of the W-variant are applicable for utilizations where the contact surface is no longer intact or there are impurities in the input material.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures consistent wear over the lifetime of the counter knife.

It is imperative to avoid the welding on or hardfacing of components of this variation, as the structure will otherwise be severely weakened. Therefore, breakage and machine damage may occur.

Fastening in the machine:

The counter knife can be combined with knives and cutters with a length and width of 50mm. Due to the wide range of models, other configuration options are possible.

It is imperative that the counter knife is only affixed to knife holders or knife crossbars with flat supports, as otherwise the attachment may cause breakage.

General characteristics:

The dimensions of the counter knife are 279mm long, 90mm wide and 30mm high.

This counter knife belongs to the Premium Line, which is manufactured exclusively in Germany.