Counter knife 479x184x58 Eco Line

Counter knife GMWM0479-X0A-E by CUTMETALL for shredding machines by Weima Maschinenbau GmbH.

Compatibility with machines:

Cutting performance and durability:

The cutting geometry and the material used for constructing have a significant effect on the insensitivity and lifetime of the product.

The item presented is made of tool steel in the X-variation, which is our standard variant for most application areas. The hardness of this counter knife is in the medium range.

Here you are offered a beneficial compromise between resistance to wear and toughness.

Due to the through-hardening process, there is a consistent hardness from the edge layer to the core. This ensures persistent wear over the lifetime of the counter knife.

To avoid breakage and machine damage, it is important not to armour or weld on this type, as it will severely weaken the structure.

Fastening in the machine:

The counter knife is mounted external on the cutting device. The other parts of this set can be found under the accessories.

This counter knife can be combined with knives and cutters with a length and width of 130mm. Due to the wide range of models, further configuration variations are possible.

It is imperative that the counter knife is only installed to knife holders or knife crossbars with ideal supports, as otherwise the attachment may cause breakage.

General characteristics:

The component measures 479mm in length, 184mm in width and 57.5mm in height.

As the counter knife is part of our Eco Line, this product is a cost-effective alternative to the Premium Line.