Counter knife left 496x98x15/26 Premium Line

Counter knife GMWM0496-X0L from CUTMETALL for crushing machines from Weima Maschinenbau GmbH

Compatibility with machines:

Cutting performance and durability:

The performance of the component depends primarily on the version of the material and cutting geometry.

In the X-option, this counter knife is made of tool steel, which is our standard variation in most break down applications. It is identified by a medium hardness.

This combines both toughness and wear resistance in a balanced ratio.

Items of this variant are hardened throughout, which means that this hardness remains the same from the edge to the core. Due to that the wear is even in relation to its tool life.

It is imperative to avoid the welding on or hardfacing of components of this variant, as the structure will otherwise be severely weakened. Consequently, breakage and machine damage may occur.

Fastening in the machine:

The counter knife is mounted left on the cutting device. The other parts of the set can be found under the accessories.

This counter knife can be combined with knives and cutting crowns with a length and width of 40mm. Due to the broad range of shredder models, further configuration variants are possible.

When fitting the counter knife, please assure that it is only fixed to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

General characteristics:

The subsequent measures are available: 496mm length, 97.5mm width, 26mm height.

This counter knife belongs to the Premium Line, which is manufactured exclusively in Germany.