Counter knife outside 245x210x60 Premium Line

Counter knife GMUT0245-94A by CUTMETALL for recycling machines by Untha.

Compatibility with machines:

Cutting performance and durability:

This spare part can be configured to the break down application, depending on the particular materials and varying cutting geometry.

The W9-variant wears faster than the X-version, but also has increased toughness and is insensitive to impurities. However, the hardness of the W9-option is lower than that of the X-variation.

Components of this variation are hardened throughout, which means that this hardness remains the same from the edge to the core. Due to that the wear is even in relation to its tool life.

We underline that this option should not be armoured or welded on. This has a negative impact on the material structure of the counter knife, which can subsequently lead to breakage and machine damage.

Fastening in the machine:

The counter knife is mounted external on the cutting device. The other parts of the set can be found under the accessories.

The component fits knives and cutters with a length and width of 130mm. Due to the wide range of models, other configuration variations may be available.

When attaching the counter knife, please ensure that it is only fitted to knife holders or knife crossbars with a flat contact surface in order to prevent breakage.

General characteristics:

The measures of the counter knife are 245mm long, 180mm wide and 60mm high.

All our Premium Line products are manufactured only in Germany.