Counter knife right 496x98x15/26 Eco Line

Counter knife GMWM0496-X0R-E by CUTMETALL for crushing machines by Weima Maschinenbau GmbH.

Compatibility with machines:

Cutting performance and durability:

The cutting geometry and the material used for constructing have a considerable impact on the insensitivity and product lifespan.

The counter knife is made of tool steel and is thus assigned to our X-variation, which is the standard variant in most applications.

Here you are offered a good compromise between resistance to wear and toughness.

In this version, the spare parts are hardened from the edge layer to the core. This means that the counter knife wears homogenously over its lifespan.

To avoid breakage and machine damage, it is important not to armour or weld on this type, as it will fundamentally weaken the structure.

Fastening in the machine:

The counter knife is mounted right on the cutting device. The other parts of the set can be found under the accessories.

This counter knife can be used for knives and cutters with a length and width of 40mm. Due to the wide range of recycling machines, further configuration variants are possible.

When attaching the counter knife, please ensure that it is only attached to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

General characteristics:

The dimensions of the counter knife are 496mm long, 97.5mm wide and 26mm high.

This Eco Line counter knife is reliable, can get the job done and is also price-competitive in comparison to our Premium Line.