Counter knife right 509x99x30 Premium Line

Counter knife GMWM0509-X1R from CUTMETALL for recycling machines from Weima Maschinenbau GmbH

Compatibility with machines:

Cutting performance and durability:

The shape and the material used for constructing have a considerable impact on the resistance and lifetime of the product.

This component presented is made of tool steel in the X-option, which is our standard variation for most application scenarios. The hardness of this counter knife is in the medium range.

Here you are offered a balanced relationship between insensitivity to wear and toughness simultaneously.

Due to the through-hardening process, there is a consistent hardness from the edge layer to the core. This ensures homogenous wear over the tool life of the counter knife.

To avoid breakage and machine damage, it is crucial not to armour or weld on this type, as it will seriously weaken the structure.

Fastening in the machine:

The counter knife is mounted right on the cutting device. The other parts of this set can be found under the accessories.

This spare part is applicable for knives and also cutters with the length and width of 40mm. With regard to the diverse range of models, further configuration variations can be realised.

When fitting the counter knife, please ensure that it is only attached to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

General characteristics:

The cutting tool measures 509mm in length, 99mm in width and 30mm in height.

As this counter knife belongs to the Premium Line, the product shown is exclusively made in German manufacturing.