Couter knife externally 245x210x60 Eco Line

Counter knife GMUT0245-14A-E from CUTMETALL for shredding machines from Untha

Compatibility with machines:

Cutting performance and durability:

The cutting tool can be matched to the operational scenario, depending on the different materials and the variance in cutting geometry.

The B1-variant has a high core strength, but is also more sensitive to wear. The advantage of this version is its high toughness. Products of this design can also be used with input that is contaminated with impurities.

Components of this variation are case-hardened, so that the hardness is remarkably higher in the edge layer than in the core.

Fastening in the machine:

The counter knife is mounted external on the cutting device. The other parts of the set can be found under the accessories.

This counter knife can be used for knives and cutters with a length and width of 130mm. Due to the wide range of models, other configuration variants are possible.

When fitting the counter knife, please ensure that it is only attached to knife holders or knife crossbars with an intact contact surface, as otherwise breakage may occur.

General characteristics:

The measurements of the counter knife are 245mm long, 210mm wide and 60mm high.

Since the counter knife is part of our Eco Line, the product offers a favourable alternative to the Premium Line.