Deflector wedge 573x100x28 Eco Line

Deflector wedge SMHD0573-X00-E by CUTMETALL for crushing machines by Herbold Meckesheim.

Compatibility with machines:

• Herbold SML 45/60
• Herbold SMS
• Herbold SMS 45/60
• Herbold SMS 80/120

Cutting performance and durability:

The efficiency of the component depends chiefly on the variation of the material and cutting shape.

This X-option deflector wedge is made of tool steel and corresponds to the standard variant in most areas of application. Consequently, it has a medium hardness.

This combines both toughness and wear insensitivity in a balanced ratio.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures consistent wear over the tool life of the deflector wedge.

Hardfacing or welding on this version should be avoided, as the structure will otherwise be seriously weakened. This can lead to breakages and machine damage.

When fitting the deflector wedge, please ensure that it is only fitted to knife holders or knife crossbars with an ideal contact surface in order to prevent breakage.

General characteristics:

This deflector wedge is 573mm long, 100mm wide and 28mm high.

This favourable option in comparison to our Premium Line is part of the Eco Line.

Field of application:

Among the many applications, the deflector wedge is suitable for recycling the following input:

• Foils
• Plastic
• Canisters
• Barrels
• Bumpers
• Thinwanned tubes
• Injection molding waste
• Profiles
• Stancing grids
• Foams
• Deep-drawn parts
• Pre-shredded tubes
• Bottle crates

If you need personal consulting in view of such a broad range of application areas, please never hesitate to contact us at any time! With the extensive expertise on recycling machines, our CUTMETALL team will help you selecting the optimum solution for your needs.