Rotor knife left 304x75x17 Eco line

Rotor knife RMRD0304-X4L-E by CUTMETALL for crushing machines by Rapid.

Compatibility with machines:

Cutting performance and durability:

Through the use of different materials and the variance in the cutting geometry, the component can be customised to the area of application in terms of throughput and lifetime.

In the X-version, the rotor knife is made of tool steel, which is our standard option in most applications. It is characterised by a medium hardness.

Here we offer you a perfect combination of resistance to wear and tear and toughness at the same time.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures persistent wear over the service life of the rotor knife.

However, this variant must not be armoured or welded on, as it negatively influences the structure of the spare parts. Subsequently, fractures and machine damage are possible.

Fastening in the machine:

The rotor knife is mounted left on the cutting device. The other parts of the set can be found under the accessories.

It is imperative that the rotor knife is only affixed to knife holders or knife crossbars with ideal supports, as otherwise the attachment may cause breakage.

General characteristics:

The product measures 304mm in length, 75mm in width and 17mm in height.

Its cutting edge is inclined at 55°/50.

The particular feature of our Eco Line, to which this rotor knife belongs, is the lower price range compared to the Premium Line.