Rotor knife middle 210x90x16 Hybrid Line

Rotor knife RMAP0210-H4JSPM by CUTMETALL for crushing machines by Hosokawa Alpine AG.

Compatibility with machines:

Cutting performance and durability:

The wear behaviour and thus also the lifetime of the product can be impacted by the material and the cutting shape. This means that the efficiency can be well adapted to the break down application.

The focus of the H-variant is on the additional carbide cutting edges with which the component has been featured. This allows a crucial increase in the service life, which also results in a considerable reduction in power consumption, dust generation and the risk of breakage.

Fastening in the machine:

The rotor knife is mounted centered on the cutting device. The other parts of the set can be found under the accessories.

It is imperative that the rotor knife is only affixed to knife holders or knife crossbars with intact supports, as otherwise the attachment may cause breakage.

General characteristics:

The dimensions of the rotor knife are 210mm long, 90mm wide and 16mm high.

The inclination of the cutting edge is 55°/ 7°.

The rotor knife belongs to the Carbide Line and is therefore provided with carbide cutting edges.