Rotor knife right 210x90x20 Premium Line

Rotor knife RMAP0210-X0R from CUTMETALL for recycling machines from Hosokawa Alpine AG

Compatibility with machines:

Cutting performance and durability:

Through the use of various materials and the variance in the shape, the item can be configured to the break down application in terms of throughput and service life.

This product presented is made of tool steel in the X-variation, which is our standard variant for most operational scenarios. The hardness of this rotor knife is in the medium range.

Here you are offered a good compromise between insensitivity to wear and toughness.

Cutting tools of this version are hardened throughout, which means that this hardness remains the same from the edge to the core. Due to that the wear is even in relation to its life cycle.

It is imperative to avoid the welding on or hardfacing of cutting tools of this option, as the structure will otherwise be severely impaired. Consequently, breakage and machine damage may occur.

Fastening in the machine:

The rotor knife is mounted right on the cutting device. The other parts of the set can be found under the accessories.

When fitting the rotor knife, please assure that it is only applied to knife holders or knife crossbars with an undamaged contact surface in order to prevent breakage.

General characteristics:

The measurements of the rotor knife are 210mm long, 90mm wide and 20mm high.

Its cutting edge is inclined at 7°/50°.

As this rotor knife belongs to the Premium Line, the component shown is manufactured exclusively in Germany.