Rotor knife right 290x85x26 Premium Line

Rotor knife RMHE0290-Y0R from CUTMETALL for recycling machines from Hellweg

Compatibility with machines:

Cutting performance and durability:

The performance of this product depends predominantly on the variation of the material and cutting geometry.

Knives made in this Y-option will extend the durability of your component. Due to the hardness the susceptibility to impurities is higher, which makes it easier to fracture.

Due to the through-hardening process, there is a consistent hardness from the edge layer to the core. This ensures uniform wear over the tool life of the rotor knife.

Hardfacing or welding on this version should be avoided, as the structure will otherwise be seriously weakened. This can lead to breakages and machine damage.

Fastening in the machine:

The rotor knife is mounted right on the cutting device. The other parts of this set can be found under the accessories.

When attaching the rotor knife, please ensure that it is only fixed to knife holders or knife crossbars with an intact contact surface, as otherwise breakage may occur.

General characteristics:

The measurements of the rotor knife are 290mm long, 85mm wide and 26mm high.

The inclination of the cutting edge is 35°/45°.

As part of the Premium Line, this rotor knife is produced in Germany.