Rotor knife right 304x73x14 Premium Line

Rotor knife RMRD0304-X0R by CUTMETALL for shredding machines by Rapid.

Compatibility with machines:

Cutting performance and durability:

The efficiency of the spare part depends primarily on the version of the material and cutting geometry.

In the X-variant, this rotor knife is made of tool steel, which is our standard option in most applications. It is identified by a medium hardness.

Here you are offered a beneficial compromise between resistance to wear and toughness.

Due to the through-hardening process, there is a uniform hardness from the edge layer to the core. This ensures homogenous wear over the tool life of the rotor knife.

It is imperative to avoid the welding on or hardfacing of components of this variation, as the structure will otherwise be fundamentally weakened. Therefore, breakage and machine damage may occur.

Fastening in the machine:

The rotor knife is mounted right on the cutting device. The other parts of this set can be found under the accessories.

When installing the rotor knife, please assure that it is only attached to knife holders or knife crossbars with a flat contact surface, as otherwise breakage may occur.

General characteristics:

The measures of the rotor knife are 304mm long, 73mm wide and 14mm high.

The inclination of the cutting edge is 51°/56°.

As this rotor knife belongs to the Premium Line, the component presented is manufactured exclusively in Germany.